
In this tutorial we will create a powerful typographic poster using the grids. We will also learn how to use layer masks and adjustment layers to modify images. Are you ready to start?
What you need
You will need access to Adobe Photoshop. If you do not have the software, you can download a trial version from the Adobe website. You will also need the following resources:
Download the images and install the font, and you're ready to get started!
1. Setting up a new Photoshop file
Step 1
In Photoshop, go to File> New. Give the document a name Snowboard poster. Set the Width to 1270 px is Height to 1600 px. Set the Resolution to 72 pixels / inch. Click ok.
Step 2
press Command-R to make the rules appear around the document. Head to View> New Guide. On the New guide options window, select Horizontal and set the guide to 70px. Click OK.
Do the same for the other sides of the document by subtracting 70px from the final dimension. To activate and deactivate the guides, press Command-;.
Step 3
For this poster, we will create a grid 5: 3 (width x height). This means that we will divide the poster vertically into five sections and horizontally into three sections. Experimenting with grids is a great way to create an unusual layout.
Head to View> New Guide. In New guide options window, select Vertical and set the guide to 254 px. Click OK.
We give the vertical guides a 254px, 508px, 762px, is 1016 px. Click OK.
We give the horizontal guides a 533 px is 1066 px. Click OK.
Step 4
On the Layers panel, click Create a new fill or adjustment layer> Solid color. Select a black color in the Color Picker options window. Click OK.
2. How to change the image of the ski slopes
Step 1
Drag the image of the ski slopes into the Snowboard poster document.
press Command-T to To commute. Head to the control bar and activate Keep the proportions button. Set the Width is Height to 75%. press log into proceed. Do not worry about positioning, we'll have fun later.
Step 2
Activate the guides by pressing Command-;. On the toolbar, select the Marquee instrument (M). Select the first two columns from the left. Use the guides for this.
On the Layers panel, make sure you have selected the Ski slopes Image. Click on Add layer mask button.
Step 3
On the Layers panel, click on the link button between the thumbnails. This will unlink the image from the layer mask. This is useful when you want to keep the position of the layer mask but want to move the image.
Be sure to select the thumbnail of the smart object and not the layer mask. Using the Move tool (V), move the image wherever you want. In the image below, I want the details of the slope to be concentrated in the middle section. I know that I want to add some text at the top and bottom of the tracks, so I will try to leave these two sections as clean as possible.
Step 4
To neutralize the image, we will add one Adjustment level. This is useful when we use multiple images in a poster in which the colors do not go together.
On the Layers panel, click Create a new fill or adjustment layer> Black and White.
Step 5
Select the new one Black White level of regulation e Right-click> Create clipping mask.
The shortcut for this is: press and hold Option, hover over the level until the down arrow appears and click. A clipping mask is useful when we want to apply a Fill level or Adjustment level only to the underlying layer. In this way, we will not compromise the rest of the poster.
Step 6
To open the Property panel, click Layer Thumbnail. On the Property panel, move the color stops to change the intensity of the color. This particular image is composed of blues and cyan. Feel free to play with these.
Step 7
To keep the levels sorted, select Ski run layer and the Adjustment level. Drag these two levels to the Create new group button. Double click on the Group 1 folder to change the name; I renamed it side.
3. How to change the image of the Snowboarder
Step 1
Open the Snowboarder image in Photoshop. Make sure you do not drag it into the document. We have to open it separately.
Click on Level mask button to create a new one Level mask.
Step 2
Let's start working on the section of the sky. Make sure you have the Level mask selected.
On the toolbar, select the Magic wand tool (W) and select the part of the sky in the image. Hold down Exchange add to the selection. Once you have selected all the sky, press Command-I to Reverse the selection. press Command-D clear.
Step 3
press activate the red overlap; this will make it easier to see which parts of the image are still working.
Select the Brush tool (B). Right click on the document and set the Dimension to 500px and the Hardness to 0. press [[[[ to to decrease is ] to to increase the Brush size. Set the To fill color to black and start brushing the snow from the picture.
Step 4
On the Layers panel, select the Level mask miniature e Right click> Refine mask.
In Refine mask option window, we can change the Display mode. I have On black (B) selected. Set the radius to 7,5 px, feather to 0.5 px, is Shift Edge to -25%. Click OK.
Step 5
Right click on the level and select Duplicate level. First name the level snowboarder and set the Destination to Snowboard poster
Step 6
Return to Snowboard poster Select the Snowboarder level and press Command-T to To commute. Head to the control bar and activate Keep the proportions button. Set the Width is Height to 40%. press log into proceed.
While grids are used to create an order in a poster, they are also used to break the rules. In this way, we are creating something that is different. A great way to break the grid is to place the snowboarder image on a grid guide. Move the image to the lower left side of the poster, as shown in the image below.
Step 7
On the Layers panel, click Create a new fill or adjustment layer> Hue / Saturation. Repeat this action, but this time add to Brightness / contrast layer.
To create a Clipping Mask, select both Adjustment levels is Right-click> Create clipping mask.
Step 8
Click on Brightness / contrast miniature level. This will show the Property panel. Set the Brightness to 36 and the Contrast to -4.
Click on Hue / Saturation miniature of the level to bring up the Property panel. Here, we can change the color of the whole image or specific colors. For this tutorial, we will modify the colors separately. Click on Master drop down menu, select RedAnd set the color to +25. This time, select the Yellow option and set the Saturation to -100. Select the Ciano option and set the color to +35.
Step 9
You will notice that the gloves, cap and face of the snowboarder are blue. We can fix it by working on it Level mask.
Select the Level mask on the Hue / saturation adjustment level. Select the Brush tool (B). Right click on the document and set the Dimension to 100px is Hardness to 0. Brush on the hat, face and winter gloves. Perfect!
Select the snowboarders and the two layers of regulation. Drag these three levels onto the Group button. Rename the group Snowboarder.
4. How to add text
Step 1
On the Tools panel, select the Text tool (T). I used white text to counter the background.
The typeface I used is Schmalfette.
Raise the Tools panel going to Type> Panels> Character panel. Below are the details I added, with the size of the type and the specific weight of the font on separate layers.
- SKI STATION
Mont-Tremblant
QUEBEC
(Schmalfette, Regular, Dimensions: 100 pt, 80 pt is 200 pt, Tracing: 100 pt, Direction: play with the main options as it will be different for each line).
- 02
–
28
OCTOBER
(Schmalfette, Regular, Dimensions: 180 pt and 50 pt, Tracking: 100 pt. I changed the scale of the dashboard to fit the width of the numbers. You can do it using the Horizontal scale on the Characters panel).
Place these two text blurbs on the top and bottom on the left side of the poster.
Step 2
We add the text to the black background. Using the Text tool (T), insert JOIE DE VIE. On the Characters panel, set the Dimension to 630 pt is main to 505 ptAnd set the color to # eb5d08
. On the control bar, activate the Right Align Text button. Place the text on the right side of the poster.
On the Layers panel, move the layer between the Snowbarder is Ski slopes groups. This is how the snowboarder it's above the letters, adding dimension.
Step 3
We add traits between words. On the toolbar, select the Line Tool (U). Go to the control bar and set the Stroke color a # eb5d08
is 3 pt. Set the Width to 665 px and the Height to 5 px.
to hold Option-Shift and drag the line to multiply. Put both traits between words. On the Layers panel, move the strokes below the Snowboarder group.
5. How to save a file for the web
Head to File> Save and save the file as you normally would.
To save a JPEG file for the web, go to File> Save for Web or Shift-Option-Command-S. Select the type of file in which you want to save the document in-I am choice JPEG– And tax 100 for Quality. Under Size of the image, you can change the pixel size of the image if you have size limits.
At the bottom left, you can see a preview of the file size. This is useful when there are dimensional constraints on a website and you have to reduce the quality or size of the image.
Click on To save… to choose the location in the new window and click To save yet.
Congratulations! You have completed this tutorial!
In this tutorial, we learned how to use grids to create a powerful typographic poster. While the grids are used to create clean and clean posters, they are also made to be broken! Be sure to post your poster in the comments below!
Today we have learned to:
- Use the grids to create an order and create a unique poster.
- Use the grids to break the rules of composition.
- Use layer masks to clean up images and refine them using the Refine mask option.
- Use Adjustment Levels to neutralize and change the color of an image.

If you liked this tutorial, you might like these:
Source link